Description

Opening a New Pre-order.  Shipping in 4-8 weeks (September).

Please add a New style Programming adapter if you do not have one.  Programming Adapter

Introducing Version 2 (Buttonless).  Buttons removed as they are no longer needed with the v2.8 firmware.  No more accidentally going into the menus.  New programming style with trigger or the Bluetooth app is the same as always.

Standard Version Recommended only for Angel LCD.

Reverse Version Recommended for all Models, Angel LCD through Angel G7FLY

Custom board with breakoff tabs. The tabs allow a custom board for all models from LCD to G7fly, including LCD, IR3, 03-04 speeds, A4, A4fly, G7 and G7fly. Once the tabs are removed, they cannot be re-attached. 05 and 06 speeds will work but due to differences in the frames (no buttons) there is no external access to the buttons.  Programming can be done with the grip off, with the Android app (IOS coming soon) or through the trigger.

The board comes with a 0.96 monochrome OLED screen (removeable) and a BLE (Bluetooth Low Energy) Module (removeable).  The screens and modules are user replaceable and compatible with all Enoch Angel Boards.

Includes 9v connector with LCD short handle toggle switch.

—-Note for 05/06 Speed/G7fly Users——-

An important note on 05 and 06 Speeds (or any model that used a board with an optical switch instead of a microswitch).  There are two issues with support for these frames.

1. Due to the lack of external buttons on the frames, some usability of the board is limited (as it is will nearly all aftermarket boards).  To program the board, it can be done either with the grip off, with the mobile app, or through the trigger.  Using the included battery harness is required, you cannot use the stock switch and harness.
2. Many triggers, especially aftermarket triggers, will not work without substantial machining and modification.  This is due to the differences in placement of the old opto switch on those boards.  This is especially true with 90deg frames. They may require the stock trigger WITH THE LEAF REMOVED or modified.

Please contact us prior to ordering if you have any concerns.

All Enoch boards are built on a Arduino 1284p, providing higher processing capabilities, and room for upgrades in the future.  The single Enoch code base provides a unified platform for ease of updates and feature enhancements.  For more information about the capabilities of all Enoch boards, please check out the Capabilities page.